Need Help! Laser always on


Results 1 to 1 of 1

Thread: Laser always on

  1. #1
    Member diazadip's Avatar
    Join Date
    Oct 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy Laser always on

    Hi All,
    I'm new user CNC Laser, im using CNC 3018 cutter and change my motor with laser 5.5w. I've trouble for using my CNC Laser. If you want to see my hardware, I've attached 2 image, that is image socket in my controller CNC 3018 and image socket in my laser 5500mw.

    The trouble is when i'm turning on my controller, my laser always on. example, if i'm adjust power laser with a small power, the laser will make a small laser (not enough to engrave wood). But, if i'm execute my picture from GRBL Laser, my CNC will engrave the wood as a picture. My question is, Can i make my laser turn off? maybe via gcode command and my laser turn on only when i needed (Example when execute picture). I'm trying to send command like S0, S500 or other value, but that's not change anything.

    *Note, the first time i'm usng GRBL v0.9. And i'm program new arduino via GRBL Laser to make new GRBL Controller with v.1.1.

    Sorry for my bad english

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Laser always on-socket-controller-cnc-3018-jpg   Laser always on-socket-laser-5500mw-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser always on

Laser always on

Laser always on