Need Help! 60W chinses laser cutter main switch


Results 1 to 5 of 5

Thread: 60W chinses laser cutter main switch

  1. #1
    Member scriptum1025's Avatar
    Join Date
    Aug 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default 60W chinses laser cutter main switch

    Good afternoon, we are a small company in Laredo, Tx and we have a 60W chinese Laser cutter that we use for engraving in Tumblers, cutting boards, acrylic and wood. Last week after 4 years it did not turn on and what I was told by an electrician it might be the main switch. We have been looking for it but with no luck my question is do you know where I can find this switch. Another thing the electrician told us is that if it's not the switch he would need the electrical diagram and if we can't find a part the diagram is impossible. Hope you can help us.

    Thank you
    Alfredo Salazar

    Similar Threads:
    Attached Thumbnails Attached Thumbnails 60W chinses laser cutter main switch-swicth-1-img_4008-jpg   60W chinses laser cutter main switch-switch-2-289b1379-ea6b-420d-aaea-bec8d31bfce3   60W chinses laser cutter main switch-switch-3-61861068874-564b8418-0e9c-4dbb-986b  


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: 60W chinses laser cutter main switch

    In the third pic there is a fuse in the side that the power cord plugs into.



  3. #3
    Member DWalls's Avatar
    Join Date
    Mar 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: 60W chinses laser cutter main switch

    Yes, like fixtureman1 suggested, take a small flat head screwdriver and pry out the fuse where you plug in the power cord, assuming of course that you haven't already tried that, I learned about that just last night when my chiller quit working after about 5 minutes, I never knew it was there.

    Good luck.



  4. #4
    Member scriptum1025's Avatar
    Join Date
    Aug 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: 60W chinses laser cutter main switch

    Quote Originally Posted by fixtureman1 View Post
    In the third pic there is a fuse in the side that the power cord plugs into.
    Sorry for the delay in answering. Yes, I did and so I been looking for a 15 amp fuse at is 2mm long and can't find it.

    - - - Updated - - -

    Sorry for the delay in answering. Yes, I did and so I been looking for a 15 amp fuse at is 2mm long and can't find it.



  5. #5
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Default Re: 60W chinses laser cutter main switch

    It is 20mm long by 5mm diameter.
    Manufactured up to 16A.

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

60W chinses laser cutter main switch

60W chinses laser cutter main switch