Need Help! Cutting thin iron foil (0.05mm or 0.02mm),which laser?


Results 1 to 3 of 3

Thread: Cutting thin iron foil (0.05mm or 0.02mm),which laser?

  1. #1
    Member lasercutting123's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Question Cutting thin iron foil (0.05mm or 0.02mm),which laser?

    Hi All,

    I am new to this website and also new to laser cutting

    I am trying to cut a thin ironfoil (0.05mm or 0.02mm) using laser. I have been told the laser type and wavelength might effect the cutting and I have to check before getting the laser module.

    I tried to read things online but still not sure, so I hope I can get help in here.

    I found this laser module:
    https://www.ebay.co.uk/i/27406272405...EaAlNLEALw_wcB

    I am not sure the power (2.5W) is enough to cut through 0.05mm or 0.02mm iron foil and if the wavelength (450nm) will not get reflected?

    I would really appreciate any information or suggestions.

    Regards

    Similar Threads:


  2. #2
    Member lasercutting123's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Cutting thin iron foil (0.05mm or 0.02mm),which laser?

    I hope I can get some ideas?



  3. #3
    Member oneeye's Avatar
    Join Date
    Aug 2005
    Location
    Brazil
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Cutting thin iron foil (0.05mm or 0.02mm),which laser?

    You will need a fiber laser with 200W at last for good finishing, Are you sure is 0,02mm and not 0.2mm?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cutting thin iron foil (0.05mm or 0.02mm),which laser?

Cutting thin iron foil (0.05mm or 0.02mm),which laser?