You have to use colors and set each one to what power you want and scan or cut
Hi l am a newbie to the laser world having owned one for just over 4 weeks. I am trying to figure out how I can, engrave at different power, speed and finally cut a material design in a single run?
By this I mean using corel draw to setup the sequence of activities and executing as one job.
Example:
1. Engrave a star at 20% power , speed 100 mm/s
2. Engrave a star at 50% power, speed 150 mm/s
3. Engrave a star at 75% power, speed 200 mm/s
4. Finally cut out rectangle, power 30%, speed 10 mm/s
I could be wrong but my research indicates that I cant do the above in one run! I have to manually do each step.
Can someone help clarify this please?
Similar Threads:
You have to use colors and set each one to what power you want and scan or cut
So it is possible
Are you aware of any videos or tutorials that will help me get my head round this?
You just have to assign a color to each thing and adjust your settings to do what you want.
What controller do you have
Hi folks, wondering how I can control thr power of my laser machine from the coral laser software package. See image attached, as you can see the feature seems to be disabled.