Hello group , i finally received a supported USB CANopen interface and it seems like it is sending and receiving CAN data when the Motion Manager 6 is searching for nodes but it finds nothing... The CAN interface seems to be trying and is supported and seen by the software. I also tried Motion Manager 5 because the version of the MCBL i have is a bit old and it doesnt getting found , the support guy from Faulhaber told me the specific "C" version was old yes but should connect using CAN interface only , not a RS232 communication , that is why i ordered an interface and took a full month to receive it ... kinda slowing the project !!
exactly MCBL 3006 C 3085 motion controller model number ...
anyone ever ran into issues like this ? or even used Faulhaber products ?