Engraving wood using fiber laser

[tumim]

Hello,

Initial data: Raycus 50wt, 200 * 200
Material: Plywood, oak.
Task: Get an engraving.

After reading the manuals, it became clear that a fiber engraver can not engrave on wood, however, some of my colleagues in the workshop do this engraving, claiming that they have fiber engravers.
As far as I know, wood engraving can only be obtained on CO2 or galvanic CO2 machines.
If nevertheless I am not right, please tell me the approximate parameters for such an engraving for testing.
Thanks in advance for your reply.

Similar Threads:

• CO2 vs Fiber vs Blue Diode for Engraving Wood
• Wood Processing By Laser Engraving Machine or CNC Wood Router

[keyencelaser]

maybe this will help you
https://www.mecco.com/blog-can-a-fib...r-engrave-wood
Kind Regards.

[oneeye]

Hi,
fiber laser do not makning wood but burn, You will get coal to weekend barbecue.

[cinematic2]

Hello,

Initial data: Raycus 50wt, 200 * 200
Material: Plywood, oak.
Task: Get an engraving.

After reading the manuals, it became clear that a fiber engraver can not engrave on wood, however, some of my colleagues in the workshop do this engraving, claiming that they have fiber engravers.
As far as I know, wood engraving can only be obtained on CO2 or galvanic CO2 machines.
If nevertheless I am not right, please tell me the approximate parameters for such an engraving for testing.
Thanks in advance for your reply.

If you need I have 100W Synrad Galvo marking machine. Close to 120W real power.