Damaged Reci Tube. Salvageable?


Results 1 to 12 of 12

Thread: Damaged Reci Tube. Salvageable?

  1. #1
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Damaged Reci Tube. Salvageable?

    Hi All, new here.

    I inherited an old RECI W4 tube which has been sitting in storage for a couple years. It has two broken areas in the glass. First is the water inlet or outlet tube, which I am pretty sure I can rig up something involving 3D printing and some silicone to connect the hose and keep it all sealed. The second area is a broken off piece in the outer tube. I am not sure what this was for and looks to me like a remnant from the manufacturing process.

    Damaged Reci Tube. Salvageable?-capture-jpg

    Damaged Reci Tube. Salvageable?-capture-2-jpg

    Looks like it is this part store photo

    Damaged Reci Tube. Salvageable?-capture-3-jpg

    Question is if this is likely broken or salvageable? Does the outer tube actually contain any gas? Can I just plug that hole and call it a day?

    Second question. I have a DY13 power supply which is supposedly matched for 130W max RECI W4. Is it possible to wire this up to a smaller tube say 60 or 80 watt?

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    758
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    This is garbage.

    CNC lasers, constructions, service


  3. #3
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by cinematic2 View Post
    This is garbage.
    Do you think it will at least fire to be able to test other components?

    Is it that the gas is gone or the insulation is compromised?



  4. #4
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    758
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    I don`t think, I know. Do not loose you time. And mine.

    CNC lasers, constructions, service


  5. #5
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    885
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    Quote Originally Posted by cinematic2 View Post
    I don`t think, I know. Do not loose you time. And mine.
    Why would it waste your time.



  6. #6
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    I am building a custom laser setup to do a very specific kind of engraving which is not commercially available (etching the inside surface of a 1" hollow tube). I am new to this so I was hoping to get some learning mileage and wear on a free tube before spending $1k+ on a new RECI W4. So if anyone has anymore insight on WHY these two cracks cannot be repaired, I would love learn.



  7. #7
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    758
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    There is a high vacuum inside this type of laser with a vestigial amount of precisely selected gas mixture.

    Last edited by cinematic2; 12-02-2019 at 06:20 PM.
    CNC lasers, constructions, service


  8. #8
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    885
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    It doesn't cost you any thing but your time to see if it will work. As long as the inner tube is ok then the outer tube is just a water cooling cover



  9. #9
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    758
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    Outer tube IS NOT a cooling water jacket :-D

    CNC lasers, constructions, service


  10. #10
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    885
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    Quote Originally Posted by cinematic2 View Post
    Outer tube IS NOT a cooling water jacket :-D
    If it is not just a water jacket then what is it. It can't be filled with a gas as the are shipped with open ends. Why do they tell you to remove all the bubbles from the water.



  11. #11
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    758
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    fixtureman1, you have no slightest idea how DC laser is build and how it works so stop this foo....sh discussion.
    Water cooling jacket is inside laser. Between inner and outer tube.
    There are 4 tubes inside.
    1. resonator for laser action
    2. cooling jacket
    3. mixture tank connected with resonator for mixture exchange
    4. spiral tube to give used (hot) mixture appropriate speed to leave resonator as quickly as possible. Professional lasers use high vaacum pumps.

    CNC lasers, constructions, service


  12. #12
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Damaged Reci Tube. Salvageable?

    Thanks guys. Took a closer look at all this and decided to scrap it. Looks to me that the outer tube is more than just a protective enclosure which is what I assumed. It's a dumb design that RECI leaves this critical piece relatively unprotected.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Damaged Reci Tube. Salvageable?

Damaged Reci Tube. Salvageable?

Damaged Reci Tube. Salvageable?