Differences and characteristics between co2 laser tube and rf co2 laser

The laser is the core of the laser equipment, and its*quality directly determines*the quality of laser*machines, especially for small and medium power laser equipment.*CO2 gas laser is the most widely used laser, and*the most popular ones*are glass CO2 laser tube and CO2 RF*metal laser.

The disadvantages*of*Co2 laser tube
Although the price of traditional glass CO2 laser*tube(There are laser tubes on the market that come with red pointer by SPT Laser, 30-260w CO2 Laser Tube - SPT Laser relatively cheap, but its use failure rate is high, the life is short, the volume is large, and the beam mode is poor (the cutting line*is thick).*Its*response speed is slow, and the low power output is not possible (the power adjustability is poor,*and the same power laser has different effects on different materials.) These shortcomings are not only difficult to meet the needs of production and processing, but also restrict its long-term development.
In terms of service life, the glass CO2 laser tube generally*can last 6000 hours, and the production capability can*affected if there is*failure*in tube. Regarding operation cost, the glass CO2 laser tube costs about 1 yuan/*hour. In addition, it is also a consumable item. The longer the use time*is, the higher the relative cost. With increasing requirements in production, CO2 glass laser tube*is hard to meet the demands*of industrial production.*

*The advantage of rf co2 laser
CO2 RF metal lasers are one of the fastest growing technologies in the industrial laser market in recent years and are considered to be the best alternative to glass tube sealed CO2 lasers.
It adopts fully metallized structure, small size, fully sealed off, compact design, maintenance-free, low cost, and excellent modulation. It has high quality laser beam (more than 3 times finer than glass tube), high injection power density, low operating voltage, convenient output power adjustment, excellent power stability, and high operational reliability. More importantly, CO2 RF metal lasers also have a long service life (generally over 20,000 hours), low maintenance costs, and it can also be reused*after refilling.
In addition, among all kinds of industrial lasers, CO2 lasers have the lowest output cost per watt and high plug efficiency, between 10% and 12%. Applications include processing on flexible materials, non-metallic solid materials and high-speed cutting,*carving, and welding*of metal materials, etc. These advantages make CO2 RF metal lasers be the optimal choice*for industrial continuous*production.

Prospects for CO2 RF Lasers
With the increasing demand and diversification of market demand, the traditional glass CO2 laser tubes is losing its advantages*in the increasingly fierce market competition. However,*CO2 RF lasers(5-300w RF CO2 Lasers - SPT Laser), with its superior technical performance, it benefits consumers with*efficiency*improvement,*production transformation*to have better profit, and plays*a positive role to the improvement of corporate competitiveness.

In general, CO2 RF laser equals to advanced production.

Similar Threads: