AWC708C LITE homing issue.....


Results 1 to 3 of 3

Thread: AWC708C LITE homing issue.....

  1. #1
    Member Mangy_Dog's Avatar
    Join Date
    Sep 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default AWC708C LITE homing issue.....

    Hi on finding the manufacturer config menu ive managed to get my laser cutter to start homing in the top left corner. However the laser then treats that as X0 Y400. And wont let the Y move down the build area. Home should be X0 Y0...

    Anyone know how to set this?

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2008
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: AWC708C LITE homing issue.....

    I would reverse the Y axis stepper so Y positive is toward the machine front. Kind of confusing and why home is normally lower left.


    Sent from my iPhone using Tapatalk



  3. #3
    Member Mangy_Dog's Avatar
    Join Date
    Sep 2019
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: AWC708C LITE homing issue.....

    you mean wire it backwards?
    To be honest i havent yet actually checked to see if its wired the right way round yet myself

    Ive also been in touch with "tech support" with trocen and i cant say theyve been helpful... I dont think they understand english very well... and keep telling me to change settings that are totally unconnected to my problem.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AWC708C LITE homing issue.....

AWC708C LITE homing issue.....