RD6442 settings configuration on K40 laser machine


Results 1 to 2 of 2

Thread: RD6442 settings configuration on K40 laser machine

  1. #1
    Member NeODarK's Avatar
    Join Date
    Aug 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default RD6442 settings configuration on K40 laser machine

    Hi, I have installed an RD6442 on my K40 laser.... When I try to cut at low speed... 5-6 mm/s the Y axis goes little fast as X axis... then the X cut is done but Y cut not because speed is a little more... How I can fix it in configuration?

    Another question...

    I have this laser power supply
    https://lh3.googleusercontent.com/1-...20-h1080-rw-no

    Is anyway to control the laser with RD6442 by PWM?

    Thanks!!

    Similar Threads:


  2. #2
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    274
    Downloads
    0
    Uploads
    0

    Default Re: RD6442 settings configuration on K40 laser machine

    Interesting problem.
    I don't have a K40 but would still be interested to know what the User or Service/Troubleshooting Manuals says relevant to the adjustments of the machine/software.
    I assume at this stage you've also contacted the seller/manufacturer and asked for support, what was their answer?
    Lastly what have you done so far to diagnose the problem? Asking because we need to know where you are in your troubleshooting process, so to avoid blindly proposing steps you may have already tried.
    Let's hope for the best



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RD6442 settings configuration on K40 laser machine

RD6442 settings configuration on K40 laser machine

RD6442 settings configuration on K40 laser machine