Need Help! Need desperate help please!!!


Results 1 to 2 of 2

Thread: Need desperate help please!!!

  1. #1
    Member
    Join Date
    Nov 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need desperate help please!!!

    I need some desperate help with my laser cutter.. its an 80w co2 and it has been working great until a couple days ago.
    its like it has more power in some parts of the cut. I have tried different setting as far as power and speed and it dosent make a difference.
    i know the first advice is always check all the mirrors and such and they are all solid also the cooling is working property and keeping temperature.
    i have check them all mirrors lens, pulleys, motors ,cables and nothing is loose.

    i have more recently checked the mA meter that is built in in my machine by advise of another member and the mA jumps high in the parts of the cut and low during the rest of the cut, the mA meter dosent stay constant through the cut so thats showing where the problem is but i dont know what could be causing it.
    . please help me out or direct me to the best way to get help thanks a lot. the machine i have uses lasercut 5.3
    what does usually make the Ma jump up and down during a cut??
    Need desperate help please!!!-img_3425-jpg
    Need desperate help please!!!-img_3425-jpg

    i cut a rectangle in wood and you can see how the power is high in some parts and low in other and this correlates with the mA meter jumping.

    Furthermore, i know the mirrors pulleys, lens, motors , cables and more are ok because there is one instance the machine makes a perfect cut. my machine has a "CUT CONTOUR" feature built in. after finishing a cut or engrave job i can press that button directly on the machine and it will cut a box around the job. when i do this it does a perfect cut and the mA meter and power dont jump up and down and you can see that by the perfect line.
    Need desperate help please!!!-img_3423-jpg
    Need desperate help please!!!-img_3423-jpg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need desperate help please!!!-img_3425-jpg   Need desperate help please!!!-img_3423-jpg  


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    875
    Downloads
    0
    Uploads
    0

    Default Re: Need desperate help please!!!

    Something in the software is telling the laser to change power. how are you drawing the squares can you use a different program to draw them then import to your control software.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need desperate help please!!!

Need desperate help please!!!

Need desperate help please!!!