laser engraving problems


Results 1 to 11 of 11

Thread: laser engraving problems

  1. #1
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default laser engraving problems



  2. #2
    CNCINDUSTRY's Avatar
    Join Date
    Aug 2019
    Location
    guangzhou
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default

    Which brand or model do you want?



  3. #3
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    876
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    try this one

    Attached Files Attached Files


  4. #4
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    Thanks, I will try that tonight



  5. #5
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    I tried to download it to my computer, but I don't know what program to save it as. It is trying to save as a rdworks file? instead of just unzipping onto a saved file?



  6. #6
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    I did figure how to get the para onto the laser, but now when I print, It wants to print huge, no matter how small I make the it..Could you help me on that,,,you have helped so much, thank you.... I still can't get the laser to go to home base, but at least it is moving up and down smoothly..thanks

    Last edited by ninainwa; 08-23-2019 at 08:40 PM.


  7. #7
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    876
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    First off cut a square that is say 100mm X100mm that you can measure. Then go into your vendor settings and read the file then save it so you can always go back to it. Change the step length for each axis by one half now if you are using my parm it will be .3500 so change it to .1750 and then write that to your controller then cut the same square. measure it and see what the difference is you can the adjust from there either up or down. Hope this helps



  8. #8
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    Thanks so much, I am going to try it as soon as I get off work, thanks for all your help



  9. #9
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    I did it and not It prints huge, I am going to download some pics..thanks



  10. #10
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    876
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    My best advise is to see if your vendor will send you the file for your laser. If that doesn't work Still try cutting a 100 x 100 mm square and see how close it is. If it is still to big divide your step number in half and cut again you should get pretty close then just keep adjusting until you get the square to cut 100 x 100 I will have to see if my old laser has the file you need.



  11. #11
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: laser engraving problems

    When I change my x axis any where close to .3500 the axis barely moves, I always have to change it to at lease 10.0000, do you know why is that



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

laser engraving problems

laser engraving problems

laser engraving problems