RE: Laser engraving problems


Results 1 to 3 of 3

Thread: RE: Laser engraving problems

  1. #1
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default RE: Laser engraving problems

    So I asked for a link for my parameters and I imported it to the machine. But my laser is still wanting to go off the rails. I posted earlier videos, and had Fixtureman1, help me quite a bit. If this is Fixtureman1, I attached a photo of the setting, not sure if they are right and what should I change.
    Thanks for everyones help

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    875
    Downloads
    0
    Uploads
    0

    Default Re: Laser engraving problems

    Where is the laser supposed to home on your bed. What brand is the laser.



  3. #3
    Member ninainwa's Avatar
    Join Date
    Aug 2019
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Laser engraving problems

    it usually goes to the middle of a bed, when it goes home and it's a china laser engraving machine roudia

    thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RE: Laser engraving problems

RE: Laser engraving problems

RE: Laser engraving problems