Hello guys, I'm Jova from Indonesia.
I have Chinese laser cutting machine 1300 x 900mm.
I just changed my laser tube 3-4 months ago and i think the problem is not from the laser tube, cause i have checked the tube and the power supply.
So here's the problem!!
On the laser cutting screen it shows 100/ 90%, it should be 100/ 100%.
i have chenged it to 100% but it goes back to 90%.
I used to cut plywood with this calculation (lasercut 5.3, not on the machine screen) :
Speed : 50
Power : 30
but now i have to change the speed into 30.
anyone have this kind of problem? please kindly share the solution and i really appreciate it.
please take a look at the picture i have shared guys, thankyou so much!!
Similar Threads: