Newbie S/W to run a machine with a Ruida RDC6442 controller


Results 1 to 2 of 2

Thread: S/W to run a machine with a Ruida RDC6442 controller

  1. #1
    Member
    Join Date
    Jan 2006
    Location
    U.S.A.
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default S/W to run a machine with a Ruida RDC6442 controller

    Hi All,

    My son was able to pick up a no name Chinese copy of a 60W Orion Motor Tech laser cutter/engraver. It looks like it has a Ruida RDC6442 control board. But he didn't get the USB dongle for the S/W. What S/W do people recommend if I can't get the dongle to run the RDWorks S/W?

    Thanks for your time.

    - Bill -

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2006
    Location
    U.S.A.
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: S/W to run a machine with a Ruida RDC6442 controller

    Never mind it appears if I had some bad information, as I was able to install and run RDWorks v8.01.22



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

S/W to run a machine with a Ruida RDC6442 controller

S/W to run a machine with a Ruida RDC6442 controller