RAYCUS 30W FIBER LASER (HELP)


Results 1 to 2 of 2

Thread: RAYCUS 30W FIBER LASER (HELP)

  1. #1
    Member ricky876's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Post RAYCUS 30W FIBER LASER (HELP)

    I am looking for some help as ive searched long and hard for some info
    i recently purchased a Raycus 30w fiber laser however shortly after using i was hit with this message

    Fiber laser: system error


    has anyone ever come across such an error and can say how to rectify

    Similar Threads:
    Attached Thumbnails Attached Thumbnails RAYCUS 30W FIBER LASER (HELP)-system-error-jpg  


  2. #2
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: RAYCUS 30W FIBER LASER (HELP)

    Turn on your laser source. I've had that error plenty of times and it's always when I forget to turn on the switch. If the switch is on then start checking to see if you have power to this source.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RAYCUS 30W FIBER LASER (HELP)

RAYCUS 30W FIBER LASER (HELP)