Water protect, Leetro pad 03-e

[DaveGoodhew]

Can anyone offer help or advice, laser control pad shows water protect active so won't start. Sensor circuit checked, PSU light on for water protect, control pad will not reset, help!

Similar Threads:

• how do you protect your cnc PC
• Need Help!- Purified water vs. distilled water vs. deionized water
• Just IN- Oil water separator and oil filter wihtout heating can protect oil
• display protect
• Protect your G54...G59

[cinematic2]

Bypass water protect circuit on mainboard.

[DaveGoodhew]

Bypass water protect circuit on mainboard.

That makes sense thanks but unfortunately don't know how to do this, I take it it's not a fault on the touch pad?

[cinematic2]

That makes sense thanks but unfortunately don't know how to do this, I take it it's not a fault on the touch pad?

Trace cables from water sesor to mainboard. When you find the input cross it to ground.
Or read fu...g instruction.

[DaveGoodhew]

Trace cables from water sesor to mainboard. When you find the input cross it to ground.
Or read fu...g instruction.

Thanks very much will try that in next few days????