Advice On Using 220V Machine With 110V Wall Outlet


Results 1 to 9 of 9

Thread: Advice On Using 220V Machine With 110V Wall Outlet

  1. #1
    johnfield's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Advice On Using 220V Machine With 110V Wall Outlet

    Hey guys, I just bought my first laser cutter (yayyy!) and I need some advice on converting my 110v wall outlet to 220v.

    This is the machine I purchased: https://www.aliexpress.com/item/4060...AbTest=ae803_3

    It’s basically a generic 4060 60W co2 laser from china.

    I’ve done some research, but due to my lack of knowledge and experience, I am unsure of the best course of action. I see 2 options

    - New 110v power supply for the machine, to replace the 220v one. I am unsure if this would cause compatibility issues between the parts inside the machine, or even if the laser would work with a 110v supply. If this would require me to replace the current controller, I’d be totally fine with that. I’ve been looking to buy a new controller anyway.

    - 110v to 220v transformer. This seems the most viable option to me, but I am unsure what wattage rating I should be looking for, and if I’m going to have issues with the wiring bottlenecking the amperage flow

    Please, if anyone has experience with this, please advise me on the best option, your help would be much appreciated

    Thanks for your time!



  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    Before you can decide on a course of action you need to know what the power requirement of the machine is: KW, Watts, or Amps to determine what transformer or other modification you decide on.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    The listing shows it is dual voltage?
    120/230v?
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  4. #4
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    Quote Originally Posted by johnfield View Post
    Hey guys, I just bought my first laser cutter (yayyy!) and I need some advice on converting my 110v wall outlet to 220v.

    This is the machine I purchased: https://www.aliexpress.com/item/4060...AbTest=ae803_3

    It’s basically a generic 4060 60W co2 laser from china.

    I’ve done some research, but due to my lack of knowledge and experience, I am unsure of the best course of action. I see 2 options

    - New 110v power supply for the machine, to replace the 220v one. I am unsure if this would cause compatibility issues between the parts inside the machine, or even if the laser would work with a 110v supply. If this would require me to replace the current controller, I’d be totally fine with that. I’ve been looking to buy a new controller anyway.

    - 110v to 220v transformer. This seems the most viable option to me, but I am unsure what wattage rating I should be looking for, and if I’m going to have issues with the wiring bottlenecking the amperage flow

    Please, if anyone has experience with this, please advise me on the best option, your help would be much appreciated

    Thanks for your time!
    Check the power supply there may be just a switch to change so it can be used on 120v

    Mactec54


  5. #5
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    JohnField For that price, I would certainly expect some set up instructions, voltage setting etc.
    Probably comes 220v by default.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  6. #6
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1740
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    My last laser came 120/240 but the adapter plug included made it fit the standard US 120 volt grounded outlet. The switches on the PS inside were all set to 120 volts. Its all DC inside so thats all you need to do.

    1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro


  7. #7
    johnfield's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Thanks for all your help guys. I just decided to go the easy way and purchased a 3000W step up converter. I guess we'll just see how it goes.

    And no, it doesn't have a 120v option on the internal power supply, I didn't buy that one from the website I linked, I guess it must have slight variations with the one I purchased.



  8. #8
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    Quote Originally Posted by johnfield View Post
    Thanks for all your help guys. I just decided to go the easy way and purchased a 3000W step up converter. I guess we'll just see how it goes.

    And no, it doesn't have a 120v option on the internal power supply, I didn't buy that one from the website I linked, I guess it must have slight variations with the one I purchased.
    Just make sure you have a good 120v supply with enough Amps it will require double the input amps for the 240v output

    Mactec54


  9. #9
    Member
    Join Date
    Jul 2017
    Location
    United States
    Posts
    347
    Downloads
    0
    Uploads
    0

    Default Re: Advice On Using 220V Machine With 110V Wall Outlet

    Did the 110v to220v transformer work?...the manuf of these transformers say they will not work on any US 220v products.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Advice On Using 220V Machine With 110V Wall Outlet

Advice On Using 220V Machine With 110V Wall Outlet