stainless steel keychains and jewelry


Results 1 to 5 of 5

Thread: stainless steel keychains and jewelry

  1. #1
    andylsmith's Avatar
    Join Date
    May 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default stainless steel keychains and jewelry

    Im looking for a low cost machine capable of cutting and engraving stainless steel keychains up to 2mm thick and small logo type jewelry. Im trying to stay around the $10k range if possible.
    something similar to these:





  2. #2
    Member oneeye's Avatar
    Join Date
    Aug 2005
    Location
    Brazil
    Posts
    83
    Downloads
    0
    Uploads
    0

    Default Re: stainless steel keychains and jewelry

    Hi, so you need two machines.One Fiber marking machine with 50W ou 100W to engraving and one Fiber cutting machine 700W or 1000W , but not normal fiber source, a NLight fiber source is needed , Fiber cutting machines with normal fiber source can´t cut reflective metal cause beam is reflected back to source and will damage. You will spend about $45000 in a 600x400mm 700W machine with nLight source and about $10000 in a fiber marking machine.



  3. #3
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: stainless steel keychains and jewelry

    Fiber laser marking machine is good for engraving.A low cost machine can be $3000.Fiber laser cutting machine is expensive.



  4. #4
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    742
    Downloads
    0
    Uploads
    0

    Default Re: stainless steel keychains and jewelry

    Quote Originally Posted by Opticlaser View Post
    Fiber laser marking machine is good for engraving.A low cost machine can be $3000.Fiber laser cutting machine is expensive. ]
    $3000.Fiber laser marking machine is flat marking capable only. For deep engraving you need 50-100W Fiber machine that cost much more than $3000

    CNC lasers, constructions, service


  5. #5
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: stainless steel keychains and jewelry

    Yes.If you just want to mark the logo and make it visible then a 20w machine is ok.But if you want to deep engraving or cutting metal then you need 50w-100w.The speed of cutting is slow and the thickness should be under 1.5mm.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

stainless steel keychains and jewelry

stainless steel keychains and jewelry