Newbie EZCAD2 for Windows 10 OS fiber laser engraving machine


Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: EZCAD2 for Windows 10 OS fiber laser engraving machine

  1. #1
    Member Kags's Avatar
    Join Date
    Apr 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default EZCAD2 for Windows 10 OS fiber laser engraving machine

    I purchased a fiber laser engraving machine from china a few months ago. EZCAD 2 kept crashing on the Windows 7 computer they sent me. Finally im guessing some of the components in the computer they sent with the machine were less than adequate and the computer took a turn. I have since purchased a laptop for use on the machine only. I was hoping someone could point me in the right direction getting software to work on windows 10 OS so that i have a reliable computer to work off of. Very new to fiber laser but the possibilities are endless and am willing to handle the learning curve. I just need a little help here and there. Thanks in advance!

    Similar Threads:


  2. #2
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Hello,What's your version of EZCAD software?We have a software and can send it to you.



  3. #3
    Member Kags's Avatar
    Join Date
    Apr 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Opticlaser View Post
    Hello,What's your version of EZCAD software?We have a software and can send it to you.


    I have 2 versions. 2.7 and 2.14 I believe. My windows
    10 is 64 bit



  4. #4
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    The EZCAD version 2.14.9 is compatible with Win10 64 bits.Do you have the installation file?I have but I don't know how to upload the file this page.



  5. #5
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Here is the software.

    Attached Files Attached Files


  6. #6
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Here is a video to install EZCAD2 to computer with Windows 10 OS.





  7. #7
    Member bilalfino's Avatar
    Join Date
    Sep 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    i need the drive of ezcad for window 10 - 64 bit please



  8. #8
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    OK.Here is a file which include drive and software EZCAD 2.14.10.And here is a video to show how to uninstall the drive.

    Sorry the file is too large and I was thinking it was uploaded.You can send a personal message to me.

    Last edited by Opticlaser; 09-10-2019 at 09:53 PM.


  9. #9
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Here is a link for the drive and software.

    https://drive.google.com/file/d/1rPP...ew?usp=sharing



  10. #10
    Member deea123456's Avatar
    Join Date
    Jan 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    hi,I tried to acces your link but is missing I can't find it can you please send me the link because I have win 10 and it's not working and it gets so frustrating when whenever I try it showes "no dongle" so If you could help me it will be great.Thank you



  11. #11
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    183
    Downloads
    1
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Link works perfectly.

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


  12. #12
    Member maxtex's Avatar
    Join Date
    Feb 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Quote Originally Posted by Opticlaser View Post
    Here is a link for the drive and software.

    https://drive.google.com/file/d/1rPP...ew?usp=sharing
    Hi, i have the same problem with Ezcad on Windows 10 64-bit.
    I tried versions 2.9.9, 2.14.9 and 2.14.10. I installed drivers from your links and all the time doesn't works.

    Do you have any solution?



  13. #13
    Member Ausfit's Avatar
    Join Date
    Mar 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Quote Originally Posted by Opticlaser View Post
    Here is the software.
    Hi i just recently purchased a 30W Fibre Laser marking machine, and i installed the software Ezcad2.14.9 software but it still says can not find dongle and i can only use in demo mode??

    Can anyone help me?

    Cheers

    Tony



  14. #14
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.



  15. #15
    Member maciej_rz's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Quote Originally Posted by Opticlaser View Post
    I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.
    same problem here in Poland with WIN10



  16. #16
    Member maciej_rz's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    i've installed ubs driver but still shows info about missing dong



  17. #17
    Member Opticlaser's Avatar
    Join Date
    May 2018
    Location
    Shenzhen
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    Can you download the driver and software?



  18. #18
    Member maciej_rz's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    hello
    yes, i can and i did it.
    i updated driver as shown on YT movie but already have te same driver.
    Unfortunately software still says about missing dong



  19. #19
    Member Andun's Avatar
    Join Date
    Jul 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    I have Ezcad2.9.9 and It was working fine with windows 7. and Install Windows 10 64bit version and when software opening it's saying "Can not find dongle.demo state".
    when i try to engrave it's saying "Current LMC Board is not for fiber Laser"
    And parameter setting F3 hardware info showing "invalid board"

    but i tried to work with windows 7 again (old hard drive) it was working file.I think problem with windows 10 64bit. installation issue.

    Does anyone have Ezcad2.9.9 software and drivers for windows 10 64bit?
    or any other solution for it?

    Thank you
    from Sri Lanka



  20. #20
    Member phuong1405's Avatar
    Join Date
    Jul 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: EZCAD2 for Windows 10 OS fiber laser engraving machine

    link good, tks

    may loc nuoc RO | Nap bon cau thong minh | http://comath.com.vn | http://xomcho.net


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EZCAD2 for Windows 10 OS fiber laser engraving machine

EZCAD2 for Windows 10 OS fiber laser engraving machine

EZCAD2 for Windows 10 OS fiber laser engraving machine