New upgrade to MPC6525A will not execute job. Does jog and home and download job.


Results 1 to 1 of 1

Thread: New upgrade to MPC6525A will not execute job. Does jog and home and download job.

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    USA
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default New upgrade to MPC6525A will not execute job. Does jog and home and download job.

    The machine cannot run a job downloaded to it. A circle was made on the screen, with laser power set to 50% and it was downloaded from the computer. The job shows up on the laser control panel. The problem is that the job will not run. The laser machine seems fine for powering up and jogging.

    Oh, and it shows Chinese and I want English.

    New upgrade to MPC6525A will not execute job. Does jog and home and download job.-1-jpgNew upgrade to MPC6525A will not execute job. Does jog and home and download job.-3-jpg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails New upgrade to MPC6525A will not execute job. Does jog and home and download job.-1-jpg   New upgrade to MPC6525A will not execute job. Does jog and home and download job.-3-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New upgrade to MPC6525A will not execute job. Does jog and home and download job.

New upgrade to MPC6525A will not execute job. Does jog and home and download job.