Need Help! 50w laser engraver


Results 1 to 8 of 8

Thread: 50w laser engraver

  1. #1


  2. #2
    Member TokinSpokane's Avatar
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: 50w laser engraver

    The photo is not clear. Are you saying it's good, or bad?

    Sent from my SM-G935F using Tapatalk

    TokinSpokane
    Custom Crafts


  3. #3
    Member craigleon123's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by TokinSpokane View Post
    The photo is not clear. Are you saying it's good, or bad?

    Sent from my SM-G935F using Tapatalk
    Bad its got a pattern on it and it suppose to be smooth



  4. #4
    Member TokinSpokane's Avatar
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: 50w laser engraver

    I have one of these 50 watt lasers also. I'm still not sure if I'm understanding what your problem is. Are you saying it has a deep texture & you want it more smooth? Give as much detail as you can. Are you new to lasers?

    Sent from my SM-G935F using Tapatalk

    TokinSpokane
    Custom Crafts


  5. #5
    Member craigleon123's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: 50w laser engraver

    Yes I'm new to laser engraving I would like it to smoother as it is leaving a deep texture we're it has engraved



  6. #6
    Member TokinSpokane's Avatar
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: 50w laser engraver

    Lower your power setting to max 15%. Then set your speed to 50mm per second. Run a test to check the quality. Set the speed higher or lower until you get what you want. Different woods may need different speeds because of density. Try that out and see if it works.

    Sent from my SM-G935F using Tapatalk

    TokinSpokane
    Custom Crafts


  7. #7
    Member craigleon123's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Engraving problems

    I'll have a go thanks. Also I think the laser is only engraving one direction is that normal?



  8. #8
    Member TokinSpokane's Avatar
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Engraving problems

    Quote Originally Posted by craigleon123 View Post
    I'll have a go thanks. Also I think the laser is only engraving one direction is that normal?
    1st keep the power at 15% & increase the speed to 300mm per second.
    2nd click on "path optimization".
    3rd always run the simulation. It will show you exactly how your image will cut, power, speed, the direction of the laser head movement & the time it will take from start to finish.

    Sent from my SM-G935F using Tapatalk

    TokinSpokane
    Custom Crafts


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

50w laser engraver

50w laser engraver