Tube problem or what?


Results 1 to 3 of 3

Thread: Tube problem or what?

  1. #1
    Activation process pakt's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Tube problem or what?

    Hello friends!
    Im having a problem with my 1390 Co2 Laser machine when i try to engrave photos.
    Im using 25% of power in one 100w reci w2 tube.
    Problem is that laser starts to engrave for 20-30 seconds and after power drops to much and not engraves nothing.
    Power supply shows around 0.5 to 0.9 ma with 25% power.
    I did some test with 50-60% and shows around 11 to 15 ma.
    With 80% reaches 27 ma.
    Another strange thing is that i tried to engrave txt with 25% and all goes fine.
    I dont know why with bmp images happens this.
    Thnx in advance!

    Similar Threads:


  2. #2
    Activation process pakt's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Tube problem or what?

    Pls someone help me with vendor and user settings files for 1390 laser because i reset to default and now axis move bad.



  3. #3
    Activation process pakt's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Tube problem or what?

    Anyone wich can help me??



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tube problem or what?

Tube problem or what?