Need Help! lihuiyu xb studio B1 replacement?


Results 1 to 2 of 2

Thread: lihuiyu xb studio B1 replacement?

  1. #1
    Registered michaelaaron1988's Avatar
    Join Date
    Feb 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default lihuiyu xb studio B1 replacement?

    Hey guys. after yanking the usb cable my laser is no longer connecting. I have tried replacing the cable , wiring up a new usb component to replace the old one and still no luck. ive traced the the wires back and checked all the wires for damage to no avail. im at a stage now where i think i just need to buy a new control board but cant seem to find that model. are there any other boards that are compatible? I will i kit out my machine eventually but for the mean time i just need it in a working state again. Any direction will be greatly appreciated.
    Thanks in advance guys

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2014
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default Re: lihuiyu xb studio B1 replacement?

    If it was me, I would go for a better controller.

    Controllers do two things: translate code into movement, and control the laser power. Not rocket science.

    The M2 Nano is really basic - take the opportunity to upgrade: https://cohesion3d.com/shop/controll...pgrade-bundle/

    You can pick a better toolpath while you’re at it. $40 spent on LightBurn will improve your productivity immensely: https://lightburnsoftware.com/



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

lihuiyu xb studio B1 replacement?

lihuiyu xb studio B1 replacement?