Need Help! Problems with x and y axis


Results 1 to 2 of 2

Thread: Problems with x and y axis

  1. #1

    Default Problems with x and y axis

    Hi there i have baught a 600mm by 400mm 100w co2 laser but does cut to correct size ex. If i cut 160mm by 160mm it is about 2mm bigger, the bigger i cut the more the size is out dont know what to do i am using coral draw x7 and can not find any pulse settings thank you in advance.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    829
    Downloads
    0
    Uploads
    0

    Default Re: Problems with x and y axis

    There is a calcutator for this in your laser software you will need to go into your vendor settings and use it. Here is a small video of how to do it.





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problems with x and y axis

Problems with x and y axis