Frame Slop - Bodor Laser 1390


Results 1 to 6 of 6

Thread: Frame Slop - Bodor Laser 1390

  1. #1
    jacquard's Avatar
    Join Date
    Sep 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Frame Slop - Bodor Laser 1390

    Hi all, i know its been asked but im struggling to fix the issue.

    I reset machine this morning as it wasn't behaving and now it just says frame slop but i have pushed origin, it does nothing, i have checked the frame and it seems ok? what the heck am i doing wrong?

    Im a newbie to laser machines and learning as I go through trial and error, so some help with this would be awesome as i have about 8 orders to do today and now a little stuck!

    Thanks so much
    Kylee



  2. #2
    *Registered User* Dmart321's Avatar
    Join Date
    Sep 2018
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Frame Slop - Bodor Laser 1390

    Hey Kylee, I wish I would have seen this sooner. If you're getting a Frame Slop error it's most likely due to there not being enough space for the laser head to slow down as it reaches the scan limits in either direction. The higher the scan speed, the more space is required to apply the breaks and then change directions. The solution is either moving your origin point away from outer limits of the X axis or slowing down your speed if the latter is not an option.

    Hope this helps! How's everything else going with your Bodor?

    Danny Martinez
    Engraving Machines Plus, Corp.
    (321) 821-7774
    danny@engravingmachinesplus.com
    Melbourne, FL

    (321) 821-7774



  3. #3
    Registered CeliaB's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Frame Slop - Bodor Laser 1390

    Hello Kylee, did you buy Bodor machine? How's everything now?



  4. #4
    jacquard's Avatar
    Join Date
    Sep 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    I did, I have nothing but issues with this machine and Im not enjoying my experience at all, it changes everytime I use it which is a real pain, and Im actually having really bad issues cutting right now, and cannot complete orders, right on christmas!



  5. #5
    jacquard's Avatar
    Join Date
    Sep 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Hi Danny, thanks for the response, it does it every so often for the smallest items, im talking a single keyring, on a bed 1300x900 so it doesnt make any sense to me at all.
    I do not love this machine, but maybe I just need some training seeing in a newbie to lasers. Im pretty sure it shouldnt change how it works from day to day?



  6. #6
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    819
    Downloads
    0
    Uploads
    0

    Default Re: Frame Slop - Bodor Laser 1390

    Where on the bed are you placing the item if it is close to the corner after you home you may have to move it over and move the head to the new spot then load the file and try to cut.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Frame Slop - Bodor Laser 1390

Frame Slop - Bodor Laser 1390