How to adjust corner power: RDworksV8 software running a G.Weike laser machine


Results 1 to 1 of 1

Thread: How to adjust corner power: RDworksV8 software running a G.Weike laser machine

  1. #1
    *Registered User* JoshEYD's Avatar
    Join Date
    Aug 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default How to adjust corner power: RDworksV8 software running a G.Weike laser machine

    Hi All,

    I’m calibrating a G. Weike laser cutter running with RDworksV8 software. It’s going well so far, however, I’m cutting thin material and need to reduce the power of the laser around corners and tight archs to avoid the slight burn out that is occurring.

    I’ve search manuals and forums and just cant find where this setting lives. Any help would be greatly appreciated!
    -Josh

    EDIT: Figured it out...super simple: Min Power corresponds to corner power and Max Power is power on a straight line.

    Similar Threads:
    Last edited by JoshEYD; 08-08-2018 at 07:07 PM. Reason: Solution discovered


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to adjust corner power: RDworksV8 software running a G.Weike laser machine

How to adjust corner power: RDworksV8 software running a G.Weike laser machine