Need Help! Attaching Rotary device to MORN Fiber laser


Results 1 to 3 of 3

Thread: Attaching Rotary device to MORN Fiber laser

  1. #1
    Member
    Join Date
    Oct 2012
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Attaching Rotary device to MORN Fiber laser

    Received my Morn fiber laser a few weeks ago, received the Rotary Kit today. Machine is not pre-wired for the rotary but kit included wiring harness and amp for rotary. Anyone here have any experience or advice? Kit did not include instructions but 24v and 5v power wires are labeled and there only appears to be one DB connector on the board the correct size. Any advice appreciated, would like to avoid releasing smoke.

    Attaching Rotary device to MORN Fiber laser-image5-jpg

    Attaching Rotary device to MORN Fiber laser-image2-jpg

    Attaching Rotary device to MORN Fiber laser-image1-jpg

    Attaching Rotary device to MORN Fiber laser-img_2622-jpg

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2012
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: Attaching Rotary device to MORN Fiber laser

    All hooked up and working perfectly.



  3. #3

    Default

    Quote Originally Posted by panaceabeachbum View Post
    All hooked up and working perfectly.
    Can you provide details on how you wired the rotary access to control board. What output pins are you using off laser control board to stepper controller?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Attaching Rotary device to MORN Fiber laser

Attaching Rotary device to MORN Fiber laser