Problem Not firing at 100%

Results 1 to 1 of 1

Thread: Not firing at 100%

  1. #1
    Join Date
    Sep 2014

    Question Not firing at 100%

    I have recently done a very thorough mirror and laser alignment on my machine, but all of a sudden it isn't firing very well. At 100% it is barely getting through the paper protection on an acrylic sheet.
    I was concerned it was a power supply issue and found an I/O Output test on the machines control panel. The test goes through various numbers on a grid like screen and fires at 100% on number 11, so I know it is capable of working at capacity.
    Any thoughts on how to get it back to firing at full capacity would be greatly appreciated

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Not firing at 100%-img_20180805_133057-jpg   Not firing at 100%-img_20180805_133102-jpg   Not firing at 100%-img_20180805_133112_01-jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on

Our Brands

Not firing at 100%

Not firing at 100%