40w laser power problems


Results 1 to 1 of 1

Thread: 40w laser power problems

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default 40w laser power problems

    Had a lot of dramas with our 40w laser it stopped working 2 weeks ago was orginially ghosting and power loss we have aligned and cleaned all mirrors.
    tried 3 power supplies
    tried 3 tubes.
    reinstalled software
    tried lightburn/rdworks
    tried 2 computers
    could it be controller?

    As you can see in the picture it does line work but when comes to scanning this was done at 70% we have never had to use that much in thew last 18mths using the machine.


    Similar Threads:
    Attached Thumbnails Attached Thumbnails 40w laser power problems-37104441_10217055282002040_2468170606676279296_n-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

40w laser power problems

40w laser power problems