is this tube bad


Results 1 to 3 of 3

Thread: is this tube bad

  1. #1
    Registered
    Join Date
    Mar 2016
    Location
    United Kingdom
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default is this tube bad

    hi all
    just got a problem with a laser, it was not cutting properly so went to set the mirrors to find that even on mirror one when we put the tape on and test fire we get 2 burns on the paper anyone any ideas ??
    cheers Dave

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    720
    Downloads
    0
    Uploads
    0

    Default Re: is this tube bad

    Sure, you need new laser.

    CNC lasers, constructions, service


  3. #3
    Registered
    Join Date
    Nov 2008
    Location
    USA
    Posts
    299
    Downloads
    0
    Uploads
    0

    Default Re: is this tube bad

    I was doing non stop cutting and started to get two beams. Have a good chiller and the tube looked ok as it ran. I just let the machine pause 10 min between jobs and the condition went away. I was convinced it was the power supply getting too hot.


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

is this tube bad

is this tube bad