Help Please


Results 1 to 1 of 1

Thread: Help Please

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Help Please

    We have a Chinese 50w laser had no dramas with it, yesterday was doing some jobs did 5 fine and then half way thru it stopped, We replaced the power supply, we have cleaned lens and mirrors and also re-aligned.
    we then tried to do another job but we for some reason have to have the power at 50% when normally we never use any more than 20.

    we have reinstalled rd works

    the first photo of the heart and pictures was last night at power 30 and then the lettering was this morning at power 50

    We have a 3000 chiller have checked that and all good

    Attached Thumbnails Attached Thumbnails Help Please-36516923_10216962890892320_13200354350989312_n-1-jpg   Help Please-36596336_10216968987844740_7766509573749342208_n-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help Please

Help Please