If you are not familiar with HV and lasers it`s better for your health to call for tech support.
i have a morn 1490-d i moved from California to port orchard Washington and i cant get it to fire. it boots and everything, but i am not an expert and i can not get the tubes to fire at all. i hear a pop sound but no beam out of the back.
Similar Threads:
If you are not familiar with HV and lasers it`s better for your health to call for tech support.
CNC lasers, constructions, service
If you know who can help thats what i am looking for.
Do you think i could replace it with a 40w tube to test it before i buy a new 120w tube?
You do realize that is no help to me. If you were sick and i just told you any doctor could help. I need names lol.
You can't get the dual tubes to fire at all, or just one?
How long do you buy the machine? What program it use?
You need to check water chiller, power supply, laser tube, wiring and controller..one bye one,
find the issue and solve it.
I can see some micro cracks in the back end of both tubes. Tube one when i pulse it burns the inner chamber. I cant seem to get tube to pulse at all.
Bought it in 2014
Uses corel
Chillers work. The psu are putting out the right voltage. wiring looks good. The builder Hot glued all the plugs before it was shipped.
Ill take photos to show the tubes and the rest just so you guys can see if there is something glaring i am missing.
I cant find anyone local at all. I even reached out to the fablab for help. They dont have a outside tech.