I have bought a new machine and it is already installed, but I have a problem when engraving. When engraving in two directions the image comes out doubled and when engraving in one direction it looks like the light does not burn the material equally.
I put pictures to see if someone can help me.
This is engraving two direcctions or X_swing
This is engraving one direcctions or X_unilateralism
I think what he says is the Scanning Reverse interva. I think that this option is used to align the bidirectional engraving.
But the last images that I post are only engraving in one direction and the problem is that the laser light does not burn the uniform material.
If you look to the right there is like a deformation, look at the image that I add.