Problem the engines do not work


Results 1 to 2 of 2

Thread: the engines do not work

  1. #1
    Registered
    Join Date
    Feb 2018
    Location
    Italy
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default the engines do not work

    Hello everyone
    Forgive my English
    I have a 40w co2 laser bought on ebay. It worked well until today. Today, after having turned it on, the laser head has remained still, not carrying out the usual movements in ignition. I connected the machine to the PC via USB but nothing happens, no command is received from the machine. The laser test works and is ok. It does not respond to the commands of the pc and moving the head manually when I switch it does not return to its place.

    Similar Threads:


  2. #2
    Gold Member john-100's Avatar
    Join Date
    Mar 2007
    Location
    uk
    Posts
    1622
    Downloads
    0
    Uploads
    0

    Default Re: the engines do not work

    I don't have any experience with laser machines but if its not communicating with your PC

    the first two things I would try are

    first - use another USB cable just in case you have a faulty cable

    second -. plug the cable into another of the PC's USB ports to see if the laser machine is detected and
    the driver installed for the new USB port

    more details of the make and model of machine will be needed
    for members here to help to fault find any electrical or electronic faults in the laser machine

    you could have a faulty power supply or control board

    John

    Last edited by john-100; 02-09-2018 at 04:59 PM. Reason: correct typo


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

the engines do not work

the engines do not work