The frame and bed are done!
LAYZOR (4) – Building the frame – man made mayhem
Hi all,
I am preparing to build an entirely self-designed 400 x 600mm laser cutter based off my old K40.
Full buildlog will be shared on my blog.
Most recent article can be found here:
LAYZOR (3) – Final design and preparation – man made mayhem
thanks for watching!
Similar Threads:
The frame and bed are done!
LAYZOR (4) – Building the frame – man made mayhem
Last edited by cinematic2; 02-20-2018 at 08:37 PM.
CNC lasers, constructions, service
Wow very cool!
And really polished. Looks like a commercial model.
All custom parts are done!
LAYZOR (5) – Custom parts – man made mayhem
New post up:
LAYZOR (6) ? Mechanical – man made mayhem
Update: Acrylic!
LAYZOR (8) – Acrylic – man made mayhem
Huge update!
This is the home stretch.
LAYZOR (9) – This is the home stretch! – man made mayhem
Hi all,
just wanted to let you know that I officially finished this project, and for that occasion I just launched a dedicated LAYZOR website.
For those that don't know, the LAYZOR is a complete rebuild of a K40, but I recommend you read the full story on my blogpost:
LAYZOR website online! – man made mayhem
and the website itself:
www.manmademayhem.com/layzor
Thanks for watching!
LAYZOR plans now available!
The LAYZOR project has been dominating all my free time since the beginning of the year. This post marks another milestone in this crazy journey.
So what happenend? Well I finally finished the complete plans for converting any K40 to the LAYZOR. I'm very satisfied with the result and I actually finished it a few weeks earlier than anticipated, so I'm giving myself a golden medal for that.
The plans are for sale over here: https://manmademayhem.com/layzor/myshop/#forsale
Cheers!
Nice work on this!
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
thanks! means a lot.
Already did some upgrades to the LAYZOR. I installed a Cohesion3D board and air assist!
Read more here:
https://www.manmademayhem.com/?p=3505
It's been quiet around the LAYZOR (€600 K40 laser cutter rebuild) but I've been working hard on making the custom part kits available. The first limited batch has already been sold out, now the second batch is publicly available for pre-order. Shipping is expected by mid-december. So for those who were hesitant about getting access to the custom parts: this is it!
Please visit the LAYZOR website for more details:
https://manmademayhem.com/layzor/pro...stom-part-kit/
On my blog there are also some articles about making these kits:
https://www.manmademayhem.com
Thanks for watching!