NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP RPM - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 14 of 14

Thread: NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP RPM

  1. #13
    *Registered User* 31st-Knight's Avatar
    Join Date
    Jul 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP

    Quote Originally Posted by The-Chip View Post
    I've solve this problem by updating firmware from 0.9 to 1.1
    Hi The Chip. well i have to figure it out how to do that on my Woodpecker CNC GRBL 0.9
    Checking the youtube's....



  2. #14
    Registered
    Join Date
    Sep 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP

    If I remember correctly.. I did it via Xloader with hex file.



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP RPM

NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP RPM