Need Help! replace Leetro MPC6515


Results 1 to 8 of 8

Thread: replace Leetro MPC6515

  1. #1
    Registered
    Join Date
    Nov 2011
    Location
    SPAIN
    Posts
    1
    Downloads
    1
    Uploads
    0

    Red face replace Leetro MPC6515

    Hello friends, this is my first post. Thanks for your great job.

    I need to update (change) my Leetro MPC6515 controller for another witch support WIN10 64, and I´m looking for controller without LaserCut soft from Leetro.

    I will like soft without softdog pendrive, and friendly interface.

    Any suggestion? Price is important because the engraver have no many hours but is old. It´s 80W chinese engraver.

    Thanks in advance.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2015
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Good morning .... I put in my a TROCEN AWC708-C and I am very satisfied .... I bought in China and I have support with the company through Skype ... I was well attended and I recommend .... If you want I'll pass you The link for you to buy .... Hug and good work ....

    Enviado de meu ASUS_Z00AD usando Tapatalk



  3. #3
    Registered
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    700
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    CNC lasers, constructions, service


  4. #4
    Registered
    Join Date
    Jun 2017
    Location
    Netherlands
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Hi,

    I am also looking to replace my MPC6515. Is there anybody who has any experience with replacing it for a Ruida controller? Also is it possible to simply replace the controller or do you need to replace other parts as well (drivers etc.)? I have G. Weike LC1390N 100watt laser.

    What kind of software does the TROCEN use? Thanks in advance.



  5. #5
    Registered
    Join Date
    May 2015
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Quote Originally Posted by DuRouge View Post
    Hi,

    I am also looking to replace my MPC6515. Is there anybody who has any experience with replacing it for a Ruida controller? Also is it possible to simply replace the controller or do you need to replace other parts as well (drivers etc.)? I have G. Weike LC1390N 100watt laser.

    What kind of software does the TROCEN use? Thanks in advance.
    Software is LASERCAD whitout dongle...

    You can connect the DSP to the computer via USB cable or RJ45 network .... Possibility to install on all computers in your company because you do not need dongle ...

    Enviado de meu ASUS_Z00AD usando Tapatalk



  6. #6
    Registered
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    700
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Quote Originally Posted by DuRouge View Post
    Hi,
    ... do you need to replace other parts as well (drivers etc.)?
    No need.

    CNC lasers, constructions, service


  7. #7
    Registered
    Join Date
    Nov 2016
    Location
    American Samoa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Quote Originally Posted by DuRouge View Post
    Hi,

    I am also looking to replace my MPC6515. Is there anybody who has any experience with replacing it for a Ruida controller? Also is it possible to simply replace the controller or do you need to replace other parts as well (drivers etc.)? I have G. Weike LC1390N 100watt laser.

    What kind of software does the TROCEN use? Thanks in advance.

    Have you replaced the MPC6515 controller? Can you please tell me some details etc. to avoid problems. I am in the same situation (LC1390N).
    Thanks



  8. #8
    Registered
    Join Date
    May 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: replace Leetro MPC6515

    Hello Sir , this is Rosa from G.weike laser , about your question , i asked our engineer , He told to me : if you want change the Ruida controller , you need change : control card and control panel , The only difficulty is that when changing these things, the connecting line needs to be re-arranged. You can find the person who sold the machine to you sales manager , they will give you the precision suggestion .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

replace Leetro MPC6515

replace Leetro MPC6515