Experience with LTCNC?

[berrys]

Hi guys,

This is my first post, is there an newbie place on this forum to introduce myself?

If not: I am From the Netherlands, europe.
I'v been searching só very, very much online on information about lasers that its not even cool anymore .
I need a good one for my small business. Specially cutting mylar for stencils.
So I thought an 500x700 would be good with minimium of 60 w.

I am now in contact with a company named Shandong Lintianzhiyan CNC Equipment Co. Ltd. also known as ltcnc.cn.
Does Anybody have any experience with them?

Is there an option on this site to keep an log about the laser I finally buy?

I am also considering the ebay versions of the 60 watt laser.. but..., those are cheap indeed (big plus), but lack motorized up and down, are 60w they say but everywhere I read they are proberbly 50 watt,
so I am carefull.

Similar Threads:

• Anyone had experience with these?
• Has anyone had experience using a CNC...
• Anyone out there with A-B SLC 500 experience?
• Need Experience GUY with OKK MHA-400
• Has anyone had experience with.....

[cinematic2]

but everywhere I read they are proberbly 50 watt,

Same as LTCNC.

[sylvain1974]

Hi im new here !
Does anyone have an experience with LTCNC ?? I want to buy a LT 1212 and I just want to make sure before.
Thanks a lot !!

[ledaero]

Hi im new here !
Does anyone have an experience with LTCNC ?? I want to buy a LT 1212 and I just want to make sure before.
Thanks a lot !!

Why are you asking in the laser section?

Go ask in CNC about CNC routers.