gcc c180 laser engraver problem .. laser tube firing a continuous weak beam

[badrawy]

hii all .. so this is my first post here in this forum i hope i can get some help ..

i do have a gcc c180 laser engraver and i have a problem that the co2 tube keeps firing a very weak beam even when am not pushing the start button or sent any file to the machine .. it starts firing that beam when i just close the door .. any ideas what's going on ?

Similar Threads:

• Chinese Laser firing two beams from one tube
• Need Help!- 50w laser has lost power & does not appear to firing correctly, do i need a new tube?
• Problem- Rabbit laser 80w, 5 months old, TUBE STOPPED FIRING LAST NIGHT
• Problem- Laser beam runs on the outside of the laser tube!
• Problem- Laser tube emitting continuous beam

[Aki1]

I'm having the same problem, did you ever fix it?

Many thanks

hii all .. so this is my first post here in this forum i hope i can get some help ..

i do have a gcc c180 laser engraver and i have a problem that the co2 tube keeps firing a very weak beam even when am not pushing the start button or sent any file to the machine .. it starts firing that beam when i just close the door .. any ideas what's going on ?

[EzzyH]

I am looking for more information on the GCC cutter/plotters. Wanting to get a semi professional machine. I think the laser cutters are different though. There isn't a huge amount of info about them but they are recommended in posts like this https://www.howtoheatpress.com/cheap...ting-machines/ with minimal actual feedback.