says the video is no longer available?
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
says the video is no longer available?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Nice! I mean the video, not the tube....
Scott
Consistency is a good thing....unless you're consistently an idiot.
ouch that hurts
is it yours?
Hi Paul G,
Just wondering, how many hours did you run this tube until this condition?
Does it always run at full power and is the power supply is a match set with the tube?
Thanks
That started from the first firing, I have have another tube like this, I'm waiting to see if they will replace it.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
What brand / model is the tube?
I would aviod the model if i were to purchase one.
I have doubt if they did a test before they send it out for sales or have any quality control on this model.
Thanks
I can't say yet, I want to wait to see what they say, the other tube that I have did the samething and they would not replace it, I have one more tube from them that has not been fired yet, so I'm hoping that one will not have a problem.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
video is corrupted or something I get pasty colors
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
Just checked the video and working perfect here.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
I believe all the tube info is on this site....back from when you first started the project.....
Thanks Vipertx, found Paul G's source for the tube.
Found that he had receive one tube on march 05.
One year plus is okay if he use it for more than 1000hours otherwise it is pretty expensive.
uses may time?
I hoped demonstrates my cnc,laser and model
www.modelcn.cn
Steve luo is where I got my tubes from and they DO NOT STAND BY THERE TUBES, they will not replace the 3 defective tubes they sold me. So buyer beware.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
that is eliminated products.
Last edited by hkxy; 12-18-2006 at 10:41 AM. Reason: resd
I hoped demonstrates my cnc,laser and model
www.modelcn.cn
uh?
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
Go to look for the person who sells him, change a new one.
I hoped demonstrates my cnc,laser and model
www.modelcn.cn
I'm looking for a new supplier, need 50 or 60watt tubes
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
60w is 1250mm
I hoped demonstrates my cnc,laser and model
www.modelcn.cn
OK and your price is?
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]