Hello,

First post on these forums!

I was wondering if anyone has any suggestions or knowledge on materials that I may laser cut (thickness up to 1/4"?) with a 100W laser (specifically a Trotec Speedy 300) that meet the IEC 60695-11-10 or UL-94 flammability criteria.

A general example would be Nylon (McMaster-Carr) which meets UL-94V2 for flame retardance.

I understand that laser cutting a flame retardant material is a bit of an oxymoron, but you never know. =P

Cheers,

Similar Threads: