This looks quite similiar to Moshi mainboard but I see few differences.
Most is STC microcontroller. Moshi ALLWAYS clears that chip to keep it secret.
Also there is no Moshi number like MS10105 Vxx.
Looks to be a copy of Moshi.
Hi friends, please help me.
I purchased a 40W laser machine on ebay in 2011.
It has MS10105 V3.9 board (Moshi) and some other circuit board inside.
Its power supply is pathetic and looks like an antique with lots of wires.
That machine did not work and I pushed it under my bed.
Now I've purchased a similar 40W laser machine at a yard sale.
This machine also runs on MoshiDraw software and it is working fine .
I am unable to identify the mother board in my new laser machine.
Please let me know which board it is.
Similar Threads:
This looks quite similiar to Moshi mainboard but I see few differences.
Most is STC microcontroller. Moshi ALLWAYS clears that chip to keep it secret.
Also there is no Moshi number like MS10105 Vxx.
Looks to be a copy of Moshi.
CNC lasers, constructions, service
Thanks cinematic2.
I wanted to buy a similar board and fix my old laser machine.
Let's see if someone can identify the manufacturer of this board.
I would send this STC controller to somebody who can read it and multiplikate.
Lots of peple had to buy new Moshi boards because it was impossible to exchange this controller.
CNC lasers, constructions, service
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.