Help, sourcing parts for LTT ILS III?


Results 1 to 4 of 4

Thread: Help, sourcing parts for LTT ILS III?

  1. #1
    Registered Pplug's Avatar
    Join Date
    Jan 2007
    Location
    USA
    Posts
    723
    Downloads
    0
    Uploads
    0

    Default Help, sourcing parts for LTT ILS III?

    Hi,
    I have an LTT ILS III laser sitting in school and the x axis started cutting rough. I took the carnage apart and one of the bearing wheels was gouged. I'm looking for a replacement part. The bearings are good, I just need the plastic wheel for the outside of the bearings. The wheel measures 16mm X 6mm with a hole of 8mm.

    I have not contacted LTT yet,but I was hoping somebody had a ready source for these parts.

    Thanks,

    Chris Corwin

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help, sourcing parts for LTT ILS III?-image-jpg   Help, sourcing parts for LTT ILS III?-image-jpg   Help, sourcing parts for LTT ILS III?-image-jpg  


  2. #2
    Member mickanoday's Avatar
    Join Date
    Sep 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help, sourcing parts for LTT ILS III?

    Quote Originally Posted by Pplug View Post
    Hi,
    I have an LTT ILS III laser sitting in school and the x axis started cutting rough. I took the carnage apart and one of the bearing wheels was gouged. I'm looking for a replacement part. The bearings are good, I just need the plastic wheel for the outside of the bearings. The wheel measures 16mm X 6mm with a hole of 8mm.

    I have not contacted LTT yet,but I was hoping somebody had a ready source for these parts.

    Thanks,

    Chris Corwin

    dear Chris,
    sorry for disturbiing you,
    i am going probably to buy an LTT ILS3,not a new one, and i would like to know if it is a good choice or not, this one have only 150 hours so i think it is ok, but what about the soft, technical and others,
    thank's a lot to take a few time for me, Mickael , France



  3. #3
    Member dcorwin822's Avatar
    Join Date
    Jan 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Help, sourcing parts for LTT ILS III?

    Unfortunately Chris passed away back in 2016. I hope you have good luck with your machine!



  4. #4


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help, sourcing parts for LTT ILS III?

Help, sourcing parts for LTT ILS III?