thanks, the current link worked for the US site; I tried to call them for pricing but apparently they are closed at the moment. I will contact them tomorrow.
do you know the prices for the Q80 and the K80?
NestProfessor is a different software than lasercut. The way it works is, let's say you have 20 different pieces to cut, you load your design into NestProfessor, and it does what's called nesting, it will find the optimal layout to cut all your parts with the least amount of wasted material. Very good if you will be cutting lots of parts.
sounds great for my application -- thanks for the knowledgeOriginally Posted by bpoulin
Hi I have a jcut 1290 laser with a 130 watt tube which started behaving very strangely recently. The label on the leetro 6515 card says its a V.4. 1.2.3 card yet when the machine starts up the lcd display says its a version 4.03. We tried downloading the correct software without any success. Is there anyone out there that can help?
Ronel
I have had so many problems with my leetro 6515 card for my 1290 jcut 130
w co2 laser machine that i am looking to install an alternative card.
Can anyone advise on the make and model of such aq card and would it be possible for someone who is a reasonably handy DIY man to install it?
Deleted .. spoke to Ronel..
Last edited by Rodney Gold; 08-06-2012 at 02:41 AM.
Rodney , Cape Town , South Africa
[url]www.tokerbros.co.za[/url]
Version
Hello Ronel ,
The versions you mentioned on leetro 6515 card and LCD are not affected the normal working of the machine . We have a machine which is same to
your machine (6515 V.4. 1.2.3 card and LCD 4.0.3).Now it is working perfectly . How does your machine behave ? If it is possible ,we could offer a Leetro 6515 card .
XYZ Machinery
J-cut is the worst kind of machine supplier. Recently got machine with horrible packing. The machine broke the bottom of the bare minimum supports a the legs of the machine was hanging out when it arrived at our port. What is worse, no grease on linear guides and ballscrews, which lead to very bad rusting. The paint job was very amateurish. Whats more, J-cut refuses to send the parts and demands payment for the broken and rusted parts.
Guys, please be extra careful, seems to me that it is a scam company.
Friendly advice: Beware of Scam companies like JCUT!
This is a Spam message made by this Scam company themselves. Machines are the worst quality. Don't ever buy from them.
Posting Permissions
Reply with Quote