Looking for Tips and Advice for Milling Wood

Results 1 to 3 of 3

Thread: Looking for Tips and Advice for Milling Wood

  1. #1
    Registered thinktankgroup's Avatar
    Join Date
    Jul 2017
    Location
    Michigan
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Looking for Tips and Advice for Milling Wood

    Hi there! We just purchased a 7-Axis Robot and want to start experimenting with milling different types of materials. We've already started playing with foam, but want to move on to milling wood next. We haven't tackled this kind of project yet, so I was hoping you all might let me pick your brain...

    - What are the methods / ways for milling wood sculptures? Wood pieces (tables, doors, frames, etc.)
    - What are the best tools to use? What are the different types? What's best for roughing vs. finishing vs. detailing?
    - What are the different types of router bits used for? Who makes the best ones? What do you look for when buying them?
    - How do we reach hard to get to areas?
    - Whats the benefit of cutting up vs. cutting down?
    - What are some overall best practices / lessons learned to master wood milling?

    I really appreciate any tips that you might have for us.

    Thanks again!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2015
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Looking for Tips and Advice for Milling Wood

    What brand of robot is it and what is the 7th axis, a track or rotary table or other?
    What cam software are you using?
    What type of timber do you mainly intend to mill?
    A lot of your questions will be dependant on the individual job you're running, so specifics might make it easier to answer...

    Sent from my SM-G900I using Tapatalk



  3. #3
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4838
    Downloads
    0
    Uploads
    0

    Default Re: Looking for Tips and Advice for Milling Wood

    Someone could write a whole book answering all those questions. Why don't you give us a break and ask one at a time? With a 7-axis machine, there shouldn't really be any areas that you can't reach; that's why people put up with the complexity of a machine like that. Can you show us some pictures of the foam parts you've made already?

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for Tips and Advice for Milling Wood

Looking for Tips and Advice for Milling Wood

Looking for Tips and Advice for Milling Wood