Originally Posted by
Palmpro Stu
Morning All,
You will probley laugh at me as its probley an easy answer. :-)
Ok I have a new CNC Machine running NC Studio.
I can cut 2D all day long from PLT files but only using the Depth in the Perameters section.
So if I want to do a multi cut:
eg: Circle 100mm Dia 10mm high with 3 cuts 3.5mm deep how do you do that?
The multipass info from Signlab exported with the info for PLT has the info inside the drawing, but when I goes to cut Z axis does not move. It will only work if I tell the depth in the PLT Import Perameters.
I tried some 3D multipass and had the same problem the image is flat not 3D
Spent 5 hours with the program and the manual but still failed.
Let me know ;-)
Have another question about the M Coordinate but will sort this problem first.