5axis machine is not operating on Constant given Feed while using A-axis and C-Axis

Results 1 to 2 of 2

Thread: 5axis machine is not operating on Constant given Feed while using A-axis and C-Axis

  1. #1
    solowalker41's Avatar
    Join Date
    Nov 2014
    Location
    Rawalpindi
    Posts
    9
    Downloads
    2
    Uploads
    0

    Default 5axis machine is not operating on Constant given Feed while using A-axis and C-Axis

    Hi all
    I am using 5 Axis machine with heidenhain control. I am doing a 5 axis operation.
    I input feed as 1000 mm/min but when A-axis and C-Axis moves while program run,machine autometically set feed below then 500mm/min which doesn't remain constant.
    I don't why it does happen. I think while All axis are synchronised ,machine limitize the feedrate corresponding the limitions of A-Axis and C-Axis, I am not sure.
    If some one knows please tell me how to overcome this problem. I want to keep constant my cutting feed while execution of M128( Axis Synchronisation) mode.



  2. #2
    solowalker41's Avatar
    Join Date
    Nov 2014
    Location
    Rawalpindi
    Posts
    9
    Downloads
    2
    Uploads
    0

    Default

    Hello guys its all about feedrate in TCPM OR M128 . Can any one please tell me the difference of both feedrates which uses in TCPM mode.



  3. #3
    Member
    Join Date
    Dec 2011
    Location
    Hungary
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default Re: 5axis machine is not operating on Constant given Feed while using A-axis and C-Ax

    No product or service may be provided in the region



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

5axis machine is not operating on Constant given Feed while using A-axis and C-Axis

5axis machine is not operating on Constant given Feed while using A-axis and C-Axis

5axis machine is not operating on Constant given Feed while using A-axis and C-Axis