Conversion

Results 1 to 3 of 3

Thread: Conversion

  1. #1
    Registered
    Join Date
    Feb 2013
    Location
    scotland
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Conversion

    Hi we have 4 XYZ machines and are excellent BUT we also have a pinnacle with a Acu-Right controller the question is can you convert this to a XYZ protrack controller this making all machines the same as Acu-right is murder to use plus it only has a floppy disk drive for inputing code from Alphacam

    thanks

    Similar Threads:


  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3826
    Downloads
    0
    Uploads
    0

    Default Re: Conversion

    The short answer is YES. As long as the Pinnacle machine ''looks'' like the XYZ machine to the controller it should work fine. The difficulty might be in getting the Pinnacle machine to be compatible with the ProTrack controller. The most important issue would be the axis motor/drive compatibility. If they are controlled in the same way on both machines then it should be pretty easy.



  3. #3
    Registered
    Join Date
    Feb 2013
    Location
    scotland
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Conversion

    thats Great thanks i will no doubt get someone in to give us a price to do the job. its a shame because everyone shys away from it.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Conversion

Conversion

Conversion