- Problem- Durma HDFL 3015 2kw Cutting issues
-
Member
Durma HDFL 3015 2kw Cutting issues
Hi guys,
Looking for someone to help me out on some cutting issues on or Durma Fiber Laser. Having lots of issues with nitrogen cutting for a start. I am using 15 bar for 14 gauge material with a 2 mm nozzle and still some burrs on the oposite side. I have been talking with diffrent laser opperators and they told me I shoudn't need over 10 bar pressure for that material. Feedrate 300ipm. Focus -0.07". Precitec Laser Head with 7.5 inch focal length also tried the 5 focal length in machine. IPG resonator 2kw. Nozzle gap at 0.012.
Similar Threads:
-
- Problem- Durma HDFL 3015 2kw Cutting issues
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules